GE Profile DPSB619ED Electric Dryer "thermostat jumper" Questions

Ad

Question about Dryers

1 Answer

...thermostat and bought a new one but realized when I got home that it didn't have a jumper terminal. The thermos have matching part Whirpool part number but the new one is missing the jumper term. ...

Ad

...thermostat and put a jumper wire and conected them and it got hot Are you trying to burn your house down? :) the thermostats prevent over-heating. They cycle your heat on and off re-connect them the ...

Ad

...thermostat on this dryer put original equipment replacement not a jumper on it has three prongs need to know which wires go where on it Oven, Dryer, Moped? What is the model number of your ...

...thermostat again and no continuity again. when I jumper the wires together it runs Did you check the blower wheel for looseness. These overheat usually because the blower wheel wears out. Spins loose ...

Hoover 5010D drier died on me...is it thermostat ? Hoover 5010D dryer suddnely died on me-stoped flat dead. I opened it up and traced with multimeter 240V powerIt appeared it stoped at the little ...

Question about Whirlpool Dryers

1 Answer

...jumper thermal couples to see if dryer will heat up . If you have a multi meter you can test the thermostats for continuity. You can jump the leads together but I would highly not advise

Question about Kenmore Dryers

1 Answer

how to test high limit thermastat? Connect a multimeter to it with jumper wires & alligator clips, then very GENTLY heat it with a propane torch or a candle. When it gets hot, it should suddenly ...

I am replacing my thermostat to a Hunter 44905 thermostat Can you tell me where my four wires goes into the hunter, from the wall is red,white ,green and blue. Unfortunately, the time to check where ...

The displays indicates a heating problem. I have checked the thermostats and heater coil. All have low ohms (less than .5 for the thermostats and about 12 for the coil) and the coil is in tact. I do ...

...jumper. Catriver. I think on your machine the lower thermostat connected to one terminal of the element, you have a wire coming from the thermal cut off down to the top terminal of the lower ...

Not finding what you are looking for?
GE Profile DPSB619ED Electric Dryer Logo

34 questions posted

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...