...lid. Also remove the lint filter and the screws holding the lint filter housing in place. Be REAL CAREFUL not to knock any of the wires off of the timer switch. Then remove the top of the dryer. ...
...remove the top of the dryer by inserting a screwdriver between the top and frame on each side of the dryer to pop the lid up from the retaining clips. Note: Some of the tops tilt backwards on a type ...
...lid to get inside to find out problem This may sound a bit over simplified but when a dryer starts to get hot inside it is a sign of an airflow problem. Start with the outside vent flapper. Check to ...
...lid. Also remove the lint filter and the screws holding the lint filter housing in place. Be REAL CAREFUL not to knock any of the wires off of the timer switch. Then remove the top of the dryer. ...
...lid.Then remove the top of the dryer by inserting a screwdriver between the top and frame on each side of the dryer to pop the lid up from the retaining clips.Note: Some of the tops tilt backwards on ...
remove screws 3) with a flat tip screw driver pry gently up on the top corners it will pop 4) move front panel forward and disconnect door switch 5) sit panel aside 6) lift top lid of dryer 90 degrees
21 questions posted
Usually answered in minutes!
514 Questions
288 Questions
131 Questions
151 Questions
118 Questions