GE Profile Harmony DPGT750EC Electric Dryer "check heating element" Questions

Ad

Question about Dryers

1 Answer

...check the wires and connections to the heating element. If this doesn't fix the problem permanently it is possible the element itself has an internal connection problem. I'd then check with the ...

Ad

...If hot then heating element is working. If not hot, check heating element issue,ie, reset hi temp thermistor, check other thermistors, check heating element for continuity. Report back what you

Ad

Question about Frigidaire Dryers

1 Answer

...heating element is to check it continuity. With the element unplugged you can check the continuity from one wire post to the next. If the circuit is open, thent he heating element is faulty. However ...

...heating element won't come on Checked thermal fuse. good. checked High Limit thermostat. good. replaced heating element. New heating element does not light up. what could cause this. you should ...

...check for lint inside the filter housing and also vent blockage. 240 volts is going into the dryer. The motor runs on 120 so you might have a voltage problem. Heating element needs 240 volts. here is ...

...check to see if the heating element is shorted out. When the vent or blower housing of the dryer get built up with a lot of lint the dryer won't vent out the heat properly and it can cause the ...

...heating element is the only problem? Its usually not the element Check 220 voltage at wall it will run on 110 but not heat Check breaker Check thermal fuse at top of element case in back 2 wires But ...

...HEATING-REPLACED THE FUSE & THE POWER CORD--HEAT ELEMENT TESTED FINE--WHAT ELSE NEEDS CHECKED? AND HOW DO YOU CHECK THE BREAKER?MODEL # REX4634KQ1 The thermal cut-off , which is the small t-stat ...

...heating element. Check the Igniter: The igniter is responsible for lighting the gas burner. If it's faulty, the dryer won't heat. Inspect the igniter for any visible cracks or damage. If needed, ...

...the element and one of them had broken. Replaced the element and tested, still has no heat... Check your all fuses that are suppose to protect your element. should have a high and low limit ...

Not finding what you are looking for?
GE Profile Harmony DPGT750EC Electric Dryer Logo

634 questions posted

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...