GE Profile Harmony DPGT750EC Electric Dryer "air blower" Questions

...air? If the blower is able to spin freely, then I would reapply power to see if the blower is getting AC to it ( Use extreme caution while working inside the dryer when you have AC applied to it) You ...

...air coming out of bottom of dryer model wed7300xmo On this weird dryer the blower is not mounted to the motor. Instead a fancy blower is mounted away from the dryer and requires a second smaller belt ...

...air coming out. hi welcome to fixya what has happend is blower fan has snaped this is an easy fix go to applince shop take your model number ask them for blower fan take off back of dryer open fan ...

air out the vent. Since you did not provide a model number I picked a similar model for reference using this model number: MDE5721TQO (there are at least 40 different model numbers but the blowers are

...see if air is blowing out hard. DON'T put your hand in hole. If air is flowing blower is okay. So check the hose may need cleaned. Hopefully Hose is blocked. Always unplug before removing any

...then the blower can get it's air from the room, and it would discharge the air properly. It sounds like a complete blockage in the supply starting with the lint filter and running to the blower

...harmony gas dryer- no air flow in or out no heat there is no air flow in or out and the dryer is not heating up Replace the blower motor. Check condition of blower wheel and replace if found ...

air flow here the vent is blocked if not blower fan most likely broken these blower fans drive hub round out on the motor shaft of the motor but it would be very loud this should fix it for you thanks

...blower wheels which moves the air through the unit, check the blower wheel see if you can move it without turning the drum, This is of course with the front panel off, The blower wheel is item #4 in ...

...air flow areas for stoppage. Could someone help before I go out of my mind! Dan HI danon this dryer its common to have the blower wear out, it slides on the motor shaft, and what they do is wear out ...