Question about Ricoh Office Equipment & Supplies
...cleaning the charge roller and the whole PCU assembly SC-302 Charge roller current leakSymptom: A current leak signal for the chargeroller is detected.Possible Cause: • Charge roller ...
Question about Canon Office Equipment & Supplies
It has been 2 years since I had service on the machine. The transfer roller is cleaning use to a vacuum cleaner.The black lines is caused to dirty charge corona or charge roller.Clean the charge unit
Question about Ricoh Office Equipment & Supplies
...cleaning blade - Develop, Bias, Charge and Transfer charges (electric) Even tech man have this options to explore, is not a "one cause only" problem. Maybe you have LUCK and hit at first atempt. Have ...
Question about Sharp Office Equipment & Supplies
...corona wire/charge corona roller and the charge corona wire gride,and the transfer/separation corona wire/roller.After clean the units and clean the optical section perform the auto image adjust
Question about Savin Office Equipment & Supplies
...out charge roller cleaner, worn out cleaning blade and seal blade. to check this, clean/wipe off toner or dirt from charge roller with cloth wet from alcohol or water. then run some test
...charge roller cleaning roller , take out the charge roller and wash it with soap and water , take out the cleaning roller and vacuim it out , be carefull not to dammage the drum .make sure that the ...
Question about Ricoh Office Equipment & Supplies
...use the izopropilalcool,clean the charge roller cleaning roller,clean use the vacuum cleaner the waste toner (located under transfer assembly 6 screw),activate the ATDC and AIDC sensor
sc 302 charge roller change roller or clean charge roller bushes SC 302 CHARGE LEAKAGE
Question about Ricoh Office Equipment & Supplies
...the charge roller in the drum unit is faulty or need to be cleaned.strip the drum unit and clean the unit charge roller current leakage, replace charging assembly and check power pack. Ricoh ...
Question about Ricoh Office Equipment & Supplies
...OPC drum & cleaning blade of machine. It will 100% solve the problem. Charge roller damage seen very rarely. what do i do i have cleaned the charge roller contacts but the code is still ...
150 questions posted
Usually answered in minutes!
629 Questions
382 Questions
267 Questions
215 Questions
218 Questions