Question about Toshiba Office Equipment & Supplies
...ADF) can scan multiple pages, including duplex pages. When using the ADF: * Load the document into the ADF faceup, short edge first. * Load up to 50 sheets of plain paper into the ADF input tray. ...
Question about Toshiba Office Equipment & Supplies
...you try to scan through the adf part a message is displayed on the screen. Something like "Document loaded". Otherwise it's scanning the glass part. Maybe the sensor in adf part is bad, not ...
Question about Toshiba Office Equipment & Supplies
...adf scan in black and white. Any ideas? Try checking for debris or other on the ADF itself and below on the prism. The ADF cover glass could be spotless, but if there is a speck on the prism itself, ...
Question about Toshiba Office Equipment & Supplies
...ADF and then the first page stops halfway through. The scan software says processing but nothing keeps processing and I have to manually pull the document page out of the ADF. All other printing, ...
...ADF cannot feed the paper you are trying to scan through accurately. Most smaller all in one printers use the same scanner element for both the ADF and flat glass scanning so the fact that glass ...
...? Then how will i know that scanning of that paper is over ? Put the paper in the automatic feeder. In the software options, click on ADF (automatic document feeder) and it will scan multiple
Question about HP Office Equipment & Supplies
ADF to scan sheets of uncommon paper or other media, such as the following: - transparencies - gummed-backed paper - magazine pages - lightweight ("onionskin") carbons For paper smaller than 5 inches
Question about Toshiba Office Equipment & Supplies
...scan Use these instructions to load originals into your device for scanning. For the best quality scans, use the flatbed scanner. See Selecting media for the automatic document feeder (ADF) for ...
Question about Toshiba Office Equipment & Supplies
...the flat bed, it is fine. If you scan from ADF in black & white is also fine. Check to see if not only the ADF is spotless, but the prism below it. If there is something stuck there you could see
ADF intake issue The ADF is taking the to-be-scanned document in but is spitting it out on the top purge instead of putting it through the scanner bed. It is still scanning but only the blank. Help? ...
176 questions posted
Usually answered in minutes!
401 Questions
267 Questions
218 Questions
181 Questions
164 Questions
