Question about Mitsubishi Office Equipment & Supplies
...voltage power supply trying to ignite the gas in the lamp. The lamp is not firing and coming on. Check the bulb/ lamp life. Possible the lamp has exceeded its useful life and may need to be
Question about Optoma Office Equipment & Supplies
...lamp life or exceeding lamp life. The unit also never displayed a temperature light. It worked last night and today it does not. There is no way that we have logged more than 750 hrs on this unit ...
Question about InFocus Office Equipment & Supplies
...projector won't turn on The lamp life may have exceeded its safe limit, check your manual as you may have to press a specific button on the unit/remote for a length of time to reset it. Good ...
...dots all over the screen. The lamp life exceeded sign came on so I replaced the bulb but the dots are still there. What do I do to make them go away? I would guess that they are dead
lamp life may have exceeded its safe limit, check your instruction manual, sometimes you have to hold the on or off button for 10 seconds to reset this. All manufacturers are different but that may be
Question about InFocus Office Equipment & Supplies
...life of the lamp. It can be done even if there is no image have a look at the infocus website all models vary on the procedure if not try a firmware update to wipe its brain but you will need the ...
Question about IBM Office Equipment & Supplies
...lamp life hours. Replace the lamp and reset the lamp hours counter. Three (3) blinks The projector has shut down the lamp. Replace the lamp. Contact Technical Sup- port for repair if replacing the ...
Question about Optoma Office Equipment & Supplies
...lamp is at the end of it's useful life. How much will it cost to replace that? My Optoma ES522 keeps blinking all the colors of the rainbow and then going to grey. It seems that's the color wheel ...
...lamp life.If a fan or lamp falilure has occured, make sure that the vents aren't blocked at all. Turn OFF the projector and wait for a minute and turn the projector ON again. If the ...
Question about Mitsubishi Office Equipment & Supplies
lamp life over the past few months? If you were experiencing an overheating problem, a "TEMPERATURE!!" message would flash up on the screen just before the unit shuts down. If there is no warning, you
40 questions posted
Usually answered in minutes!
21 Questions
23 Questions
27 Questions
15 Questions
22 Questions