Question about Sanyo Office Equipment & Supplies
...filter warning light on Sanyo PLC-XL50a. Filter has been cleaned but lamp comes on for 25 seconds then power light flashes. How can I reset filter warning counter WITHOUT menu use.lamp not on Sanyo ...
...light would continue to flash red and the power light would be solid red. You should clean the air filters. The filters are located on the underside. Disconnect all cables and invert. remove the 2 ...
Question about Sony Office Equipment & Supplies
...filter warning sign comes up and then shuts the projector down in 1 min. I have changed the lamp and filter. How do i reset the timer for the Lamp Hours and get rid of the warning? Once the filter is ...
Question about Panasonic Office Equipment & Supplies
filter warning dust filter door you need to clean dust filter and replace filter if required it depends on which model u are referring to this message is seen generally in the hi end models only - DLP
...warning "no lamps available". or we should change a chip memory timmer for the lamps See the manual if there is a lamp timer that you will need to reset or maybe filter cleaning timer. Maybe it is ...
...let you know there is a problem, usually overheating! Make sure it is well ventilated and that the filters have been cleaned. Try disconnecting the AC power cord and then reconnect it to check if it ...
Question about Sanyo Office Equipment & Supplies
Warning lamp blinks red. Tried new bulb just for kicks, but not the problem. Any ideas? Time to clean the air filters. See manual how to clean air filters and reset the filter cleaning counter in the ...
I get a filter warning message. What to do? Clean the filter, and in the user menu, you should be able to clear the message. I'd recommend cleaning the filters once a month.
...warning signal that I need to change or replace my filter, thing is there is no visible filter which makes things complicated! Anybody??? Hi Cathy, The replacement of the filter is something that ...
...sure the projector is cool and the power cord is unplugged before beginning. 2 Vacuum the air-filter. WARNING: Never operate the projector without the air-filter; doing so will damage the
1 questions posted
Usually answered in minutes!
35 Questions
33 Questions
22 Questions
14 Questions
16 Questions
