Question about Mitsubishi Heating & Cooling
...cool" unit's left indicator light blinks and the right is off, the unit fan runs, but no cooling is provided. This pattern of indicator lights is not in the Operating Instructions. Resolution: The ...
...cool light just blinks and the commpressor never turns on... Check the connection between the starting capacitor and the Start "S" of the compressor it should be connected and also the "cool light" ...
not cooling and shutting off, indicator light flashes Within 5 minutes of turning on the air-con, it will turn itself off. In this time it will not have any cooling effect at all. When the aircon ...
...will not cool room. Cool mode Freidrich cp06e10 will not cool room. Cool mode light flashes green, condenser never turns on, how do I fix this? is it just the condensor motor thats not comming ...
...cool. After about 20 minutes it goes to sleep , vents close but green light still on to indicate on. Check out door unit coil dust blocked or out door fan less rpm. Clean coil and replace capacitor ...
...light goes on. Fortunately, from what you have described, the unit is working as it should. But, the frequency that it's occurring is what I think you're concerned about. If you are operating ...
Question about Heating & Cooling
...working, but no cold air and no red operation light after opening the vents check that it is set to cooling sounds like it may be set to heat in cooling mode the indoor fan should at least ...
light from left blinks. i need to know what that means? It's not an error. you have it set in auto mode and it is cooling. when it switches to heat the lights will switch as well. Set to cool only
Cool/AC light is blinking Fan mode works fine But when i try to switch to 'cool' mode, the light just blinks and the air never gets cold enough Try cleaning the filters & coils good with a shop vac, ...
Question about Sanyo Heating & Cooling
...light indicates it's either heating or in defrost mode Check the outdoor unit if the compressor is running - the large pipe on the outdoor unit should be hot on heating or cool to touch on ...
8 questions posted
Usually answered in minutes!
103 Questions
59 Questions
69 Questions
50 Questions