Technical Support, Instructions & Repair Service

GE AHG50LB / AHG50LD Dehumidifier > Search

GE AHG50LB / AHG50LD Dehumidifier motor


Cleaned the motor and that fixed the problem - Thanks for response more...
.   GE AHG50LB / AHG50LD Dehumidifier - Troubleshooting


electronic motor 115 volt noise wanted to know the casue of a new noise coming from my jet lathe motor - it started a hummung sound more...
.   GE AHG50LB / AHG50LD Dehumidifier - Troubleshooting


sounds like the fan motor is bad most are not repairable new ones about 50$ dan more...
.   GE AHG50LB / AHG50LD Dehumidifier - Troubleshooting


the clicking is the compressor over load safty switch. possably start componets or compressor motor not good eather way dan more...
.   GE AHG50LB / AHG50LD Dehumidifier - Troubleshooting


Friedrich model d40c. Bucket is not collecting water.Motor is running and fan is working more...
.   GE AHG50LB / AHG50LD Dehumidifier - Troubleshooting


THE FAN MAY OR MAY NOT HAVE OILING PORTS ON THE MOTOR. IF NOT, THE MOTOR NEEDS REPLACED. IF THERE ARE OILING PORTS ON THE FAN MOTOR, TRY SPRAYING SOME WD-40 IN THEM AND THEN ADDING more...
.   GE AHG50LB / AHG50LD Dehumidifier - Troubleshooting


a time. You can also: 1) Disconnect the power cord. 2) Remove the cover and clean the condenser and evaporator coils, as discussed above. 3) Lubricate the fan motor bearings with a couple of drops of oil if the motor has oil ports (some units don't need to be oiled). While you?re at more...
.   GE AHG50LB / AHG50LD Dehumidifier - Troubleshooting

[1] 2 3     Next

Sponsored Links

Loading problems.

Repair Service

Find Dehumidifier Repairman Near You:
Browse the Repair Directory
Repairman, Get Listed FREE