Question about Northern Tool Heating & Cooling
...wick stops burning in certain areas around the ring. It is always the same spots. I get the K-1 from the same retailer every time. Is it time for a new wick? If yes, what wick number. The wick has ...
...wick by trimming evenly all around with very sharp scissors; otherwise, use stiff brush... then assemble wick to a location that will be about 1/4 to 1/2 inch higher than when removed. may as well ...
Question about Northern Tool Heating & Cooling
...around the wick and the draft pipe -- the hollow tube that holds the wick -- and serves to hold the wick firmly in place. 5 Slide the wick up as far as possible to reveal the positioning pin -- the ...
...around it is clear liquid - then blow it out, and after ensuring that the wick tip is no longer glowing, quickly crush a few absorbent paper towels into the bowl and upturn it again. The aim is to ...
...around try rolling the wick adjuster knob down within the adjustment range - the wick may just be raised too high. If these things do not fix the problem wait until the heater is cool and inspect the ...
Question about Corona Heating & Cooling
...around the ring. Make sure you are using 1K kerosene too. That makes a big difference in the use of your heater. If I can help you any other way please feel free to contact me. Good solution from ...
Question about Rinnai Heating & Cooling
...burning chamber gets bigger and turns orange, It seems if we squeeze the intake hose to slow/stop the flow of air into the system for a moment it will stop for a few minutes. the toyostove is ...
...wick, I let it soak for atleast 48 hours, once the heater is burning i bumped into it and the auto shut off fliped off and it kept on burning but only flickering. The dial knob did not spin all the ...
93 questions posted
Usually answered in minutes!
264 Questions
27 Questions
5 Questions
5 Questions