pump will not run in its cycle. Pump check out ok ? The rinse water in a LX30 is driven by water pressure. A solenoid valve, bottom front - gold body, opens up and allows the water to flow. If you are
Question about Hotpoint Dishwashers
...pump to force water into spray arms? dishwasher just hums when "wash" cycle is on. could this be a pump problem? could it just be clogged at the intake of pump? suggestions what to check would be ...
...pump housing, trying to remove 5/16 impellor mounting screw, but it won't turn even with considerable force. Maybe a peanut or piece of bone stuck in it. What have you been eating that may have gone ...
...behind the water fill valve. Even if something (mouse, bug, etc.) other than a leak has caused this to move, it can force the control to shut down all operations and run the drain pump
run through the entire cycle, and I can hear and also see water cycling through the system. It looks like a low amount of water is lightly sprayed on the lower rack dishes. The system never seems like
...run an entire cycle and the dishes did not even get wet. What do I do? It could be a motor or a pump issue. The dishwasher has a motor that attached to a pump which forces the water up into the ...
...force it through the holes in the propellers so it's just kind of dumping water out as opposed to having any forced pressure. Hope this makes sense. There are no error codes showing. Anyone have a ...
...pump and check to see of the impeller spins freely. if not some times you can force the impeller to spin and it will free it up.. or take of the drain hose under the unit and spin the impeller with ...
...It sounds like the spray arm is making the noise -- this is the part thru which the motor / pump forces the water during the wash cycle -- the pumped water causes the arm to rotate -- a warn or ...
10 questions posted
Usually answered in minutes!
690 Questions
238 Questions
203 Questions
148 Questions
95 Questions