GE 24 in. GSD4030Z Built-in Dishwasher "burning smell starts water" Questions

Ad

...burning smell, opened washer door and washer was filled with smoke. Turned everything off, cleared smoke, and the washer water dispenser is very hard to turn. Washer has symptoms of burnt up motor ...

Ad

Question about GE Dishwashers

1 Answer

...smell like burning wires or something. water is getting in but the motor wont start. is the motor fried? Mine is doing the same thing. I just removed the motor & it is definitely where the smell is ...

Ad

Question about GE Dishwashers

1 Answer

...just a humming, then a clicking sound, then a faint smell of maybe burning?? This is motor failuer. replace asap. the smell is the motors copper windings heating up the internals of the motor

Question about Maytag Dishwashers

1 Answer

...burning smell when I turn the dishwaher on, the water start running for 1 minute or 2 than stop shortly and doesn t reach the arm then the dishwasher becomes hot inside . Thank you something has ...

Question about Dishwashers

2 Answers

burning smell and the resulting circuit breaker trip. There is of course the possibility of internal wiring chaffing, the heating element or water valve solenoid failure that could also cause a short.

Question about Dishwashers

2 Answers

burning smell. Stopped washer. Visually checked things out-didn't see any smoke-turned it back on. Smelled smell again-smelled like wood burning! Turned off machine, unplugged and tried to pull it out

...smell comes from machine and I turn off. When I put machine onto reset it takes about 40 seconds before water eventually drains. I think you have a failed control panel Pressure chamber on left hand ...

Question about Dishwashers

1 Answer

...inducing a burning scent during the drying process. always make sure that all plastics are secure before you start the cycle. food can get stuck on this heater element as well causing a burned

...what wash setting its on, what does this mean?? i think it means the water heater in the dishwasher is not working,or the element is shot. my 300 had a burning smell before the light started

burning. Opened it and noticed no water was in it. Restarted and still n Worked fine until yesterday Sounds like the water inlet valve isn't working. Check your house water pressure and make sure it's

Not finding what you are looking for?
Dishwashers Logo

23 questions posted

Ask a Question

Usually answered in minutes!

Top GE Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a GE Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...