GE Profile PDW8600J Built-in Dishwasher "water comming top arm" Questions

Ad

Question about KitchenAid Dishwashers

1 Answer

water to the top arm. Usually they have a split in them so the water does not get to the arm to spin it. The fix is to replace that rubber tube. You will need the model number of your machine to order

Ad

...water or movement from top arm Our Maytag4100 fills with water, empties at the end of the cycle and dries just fine. The trouble is that there is no water coming out of the top arm; therefore the ...

Ad

...top arm is not turning in my washer Model #GU1200XTLB2. I have removed it and cleaned it and it is still not turning. Can you offer any suggestions? Thank you, When I open the door the arm is in the ...

...water, fill ok. On the inside top of center of arm where it meets the center input connection there is gunk to remove. How do I get to it? remove arm? thanks The problem is hard water. Go to ...

Question about KitchenAid Dishwashers

1 Answer

...water to the spray arm. Cant seem to fix it. Any ideas? Hi, When my wife started complaining about her dishwasher not getting the top rack clean this is what I found and I wrote a tip about it... ...

...top be careful the water will spray out to your face too. This is only to check to see the motor is running normally. If the water level is good ( that is just touch the filter) and the problem still ...

...water may not be flowing down from the top of the unit to enter into the spray arm, but I can't tell when I open the door. Please help. I removed the lower arm, the strainer, and three screws (Torx, ...

Question about Dishwashers

2 Answers

top rack. I have also tested my water temp. It is over 120 degrees. When the unit runs you can hear the water sloshing around. When complete, the top dishes are wet but not clean. Any ideas as to what

Question about Frigidaire Dishwashers

1 Answer

...top rack and water flows out from the openings. So what's causing the problem? The bottom rack dishes are perfectly cleaned though. It is likely that sufficient water is not coming from the top arm. ...

...water to the top levels and that must have gone bad. He's advice -- to replace the dishwasher. The main pump works fine and drains the wash water every time. After doing a little research, I'm not ...

Not finding what you are looking for?
GE Profile PDW8600J Built-in Dishwasher Logo

48 questions posted

Ask a Question

Usually answered in minutes!

Top GE Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a GE Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...