Samsung SyncMaster 943BM Flat panel TFT 19" Monitor "tv lamp stay" Questions

...stay on longer and longer. After about a minute of that, the display comes on steady but dim and gradually over 20 seconds or so comes up to full brightness. It then works fine until I allow it to go ...

...can guide you further and it will help out other people in the future also. Basic LCD monitor and TV troubleshooting guide: http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting ...

...stay on. Upon ac switching monitor will display for split second and then go black. Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they ...

...can guide you further and it will help out other people in the future also. Basic LCD monitor and TV troubleshooting guide: http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting ...

...can guide you further and it will help out other people in the future also. Basic LCD monitor and TV troubleshooting guide: http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting ...

TV monitor switch thus not turn on. The green light bleeps and the screen goes blank. Can you help? ritchaddison, Problem could be inside monitor. If "cold-cathode-fluoresscent-lamps" fail to stay lit

...stay on. Why doesn't it turn on right away? It may have dying power supply due to bad caps. If you are going to DIY and already try the monitor with another PC, and have proper tools and know safety ...

...stay It may have dying power supply due to bad caps, that will be the first place to check. If you are going to DIY and already try the monitor with another PC, and have proper tools and know safety ...

...can guide you further and it will help out other people in the future also. Basic LCD monitor and TV troubleshooting guide: http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting ...

...STAY LIGHT Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed ...