...fuser and exit transfer ubit. paper still jams @ the fuser 1. Faulty/blocked fuser exit sensor or faulty/blocked POB sensor. The printer thinks paper is present at one of these sensors when there ...
...fuser and exit transfer unit, but the paper jams everytime @ the fuser. 1. Faulty/blocked fuser exit sensor or faulty/blocked POB sensor. The printer thinks paper is present at one of these sensors ...
Question about Xerox Phaser Office Equipment & Supplies
...FUSER. WHAT IS THE SENSOR BEHIND THE FUSER CALLED. OR BETTER YET WHATS THE PART NUMBER. KIT EXIT SENSOR (Fuser Exit Sensor Kit) part no. 015K60900 Check out this video, explains that part pretty ...
...exit assembly isn't pulling the paper out of the fuser now and it is jamming with an accordion effect on the paper. Any guesses as to what is going on? Thanks. Those rollers are necessary to feed ...
Question about Xerox Phaser Office Equipment & Supplies
...fuser exit sensor had an updated version for that model (old model has a "bounce" problem). Xerox gives a 1 year warranty..I would get them out to fix it pronto ! It is also helpful to have the error ...
Question about Xerox Phaser Office Equipment & Supplies
...• Faulty system card Action • Check for anything in the paper path that might cause the paper to jam. • Load paper in the manual feed slot. • The fuser exit sensor may not be functioning
...fuser unit drive gears. 2. is the exit rollers are good some time exit roller got damaged they don't hold hold paper to run out from machine. 3. do u have clean the exit sensor. 4. do you have verify ...
Question about Xante Office Equipment & Supplies
...fuser exit sensor on my Xante Ilumina? My paper keeps jamming over and over but there is nothing in the fuser, the paper is set correctly and i just cleaned all the rollers. I noticed a little piece ...
Question about Xerox Phaser Office Equipment & Supplies
...Fuser Lexmark C534 Fuser Exit sensor is never made. Possible causes: ? Improper loading of manual feed slot ? Paper wrapped in fuser ? Damaged paper exit sensor or paper exit sensor flag Gerrit ...
Question about Xerox Phaser Office Equipment & Supplies
Exit jams in the fuser can be caused by a broken fuser drive gear or a broken gear on the fuser. Remove the fuser and check the gear inside the printer for broken teeth. Manually turn the gears on the
1 questions posted
Usually answered in minutes!
436 Questions
284 Questions
262 Questions
152 Questions
147 Questions
