Epson WorkForce 30 InkJet Printer "printing data port" Questions

...data received then starts again printing the funny text Might be askew codes. Check through which port it's printing?..Try ...

...feed a second time to complete the test print. Set port to setting specified by printout. e.g. (at command line) mode com1:9600,N,8,1 mode port : baud , parity , data bits , stop bits I hope this ...

...DATA TO THIS USB STICK AS POSED TO PRINTING A HARD COPY. You save your data to to the USB 'stick' via your PC's USB port, not the port on the printer. This port is simply for printing information ...

printing status window says -"pc cannot send data to printer. pls check power and printer cable connections and retry printing". it was working fine earlier, now suddenly this message, i have ofcourse

port using EPL2 language, when i send the code S4M appears to receive data, but nothing prints. The display window on the front of the printer changes from showing the version to showing DATA and then

printing and show DATA PCL on the screen. I shut it off and back on and it prints garbage.....how can I fix this?? thank you Try this if connected parallel: This error may occur if you have a computer

...data cable. If still not working check that you are using the correct port within the driver . Goto Printers and faxes Make sure that the printer states Ready not offline If states offline Right Hand ...

...data to the IP Address or the Com port in question. Avery Dennison, the folks that own Monarch/Paxar, have a utility that will allow you to send your notepad file either tcp/ip or through a com port. ...

port, it's very important that the serial settings match between Easylabel and the printer. Easylabel defaults to 9600 baud, 8 data bits, none parity. The Zebra defaults to 9600 baud, 7 data bits, and

printing data from another port. This happened minutes after I printed a document without any problems.... thanks for your help! Tom open the printer properties on your laptop. see the number port USB