GE 24 in. GSD6660GSS Built-in Dishwasher "middle arm rotating" Questions

...in the middle of the arm), if that isnt enough you can drill 2 small holes in the side, near the end (same sides as the rest of the holes) those holes is usually enough to make the arm rotate ...

...arm and the middle spray arm are not turning anymore. Is this a water pressure problem? We purchased our kitchen appliances Sept. 07 and our warranty is no longer in effect. Any ideas on how to get ...

...arm and the middle sprayer arm. The cycle begins with the lower arm spraying first, then switching over to the middle sprayer arm, and back again through-out the washing cycle. The sprayer arms will ...

...middle arm rotates fine. The arms will move when manually munipulated but do not spill while the dishwasher is on. There was a loud grinding the first time the dishwasher was used and it seemed to ...

Middle arm stopped spinning I have a GE Triton XL dishwasher that worked fine up until 2 months ago. I have checked the filter and have run cycles with vinegar and bleach. The middle arm has stopped ...

middle wash arm not rotating on a GDL5800L00. Water comes out of holes but does not turn. Arm spins free Check the spin spindle at the pivoying point. Clean it. The spinning takes place through the ...

middle spray arm does not rotate top one does and they are fed by the same water source. Please check: Does the arm turn freely?  Are the jets clean and spray in the right direction? If not you ...

...middle hole. The arm does not rotate nor does water attempt to come out of the wholes in the Arm Check the small holes on the spray arm. They are most likely plugged. (candy wrappers, tooth picks, ...

...arm will rotate. all three get water but middle and upper arms don't rotate. cleaned out water distribution line and arms with air and no food or debris found. The seals that the racks "plug" into ...