Question about Epson WorkForce Office Equipment & Supplies
...tab - click Add Port - Standard TCP/IP port - Port Name eg. 192.168.1.10 Printer name eg Network printer Click OK Then do a TEST print if it does not work then the IP address is
Question about Kyocera Office Equipment & Supplies
...standard TCP/IP port. Is there a way to get the print to function without the kprint software since it does not work on the new server. I even tried compatibility mode. Thanks The KM-1650 will print ...
Question about HewlettPackard Office Equipment & Supplies
How to Setup a TCP HP DesignJet 800 Plotter Add Printer/Local/create a new port/standard TCP/IP/insert IP address - can be found on plotter config/load driver
Question about Samsung Office Equipment & Supplies
...say Standard TCP/IP port and the name Samsung CLX-3160 FN. Highlight it and click on Configure Port. Make sure the address there matches the Static TCP/IP address you set in the printer. Good
Question about Office Equipment & Supplies
...Standard TCP/IP port 1 In Windows XP, click Start > Printers and Faxes. In Windows 2000/Windows Server 2003, click Start > Settings > Printers. In Windows Vista, click Control Panel > ...
...Standard TCP/IP Port, and then click the [New Port] button. 6. When the Add Standard TCP/IP Printer Port Wizard starts up, click the [Next] button. 7. In the Name of printer or IP address box, enter ...
Question about Epson WorkForce Office Equipment & Supplies
unselect attached) Select "Create a new port" Choose Standard TCP/IP Enter the TCP/IP Address as 192.168.2.155 Install the Bizhub's driver (should be in CD that came with the printer). Hope this helps
...STANDARD TCP/IP PORT · Click on NEW PORT · This should open the TCP/IP Printer Port Wizard, work through this entering the IP Address and Port Name. Windows may try to detect the port ...
...aoption of standard TCP IP port. go next and configure the port. give appropriate IP adress which you have given to your printer andfinish the procedure. switch printer off and then on.restart the
...Standard TCP/IP Port option and click New Port. TheWelcome to the Add Standard TCP/IP Printer Wizard appears.Click Next.In the Printer Name or IP address area enter the node name of ...
365 questions posted
Usually answered in minutes!
80 Questions
108 Questions
96 Questions
57 Questions
44 Questions