...oven. All other buttons work except "bake". No trouble codes showed up either. Tried a reset, but since "bake" button doesn't work, can't do that either. Did the ignitor failure do something to the ...
Question about Whirlpool Kitchen Ranges
...gas range and the oven button doesn't work. We can get the broil setting to work but not the oven. Check underneath the bake panel and make sure the ignitor bar is glowing when you set it for
Oven "bake" doesn't work... When we hit the "bake" and "start" buttons, the gas oven no longer ignites. The top burners and the broiler still work fine. I thought the bake element might need ...
...Bake on, oven became hot, after 5 to 10 minutes, oven display blank or flashing (sometimes with flashing clock time, sometimes just blank) Broil function problem: Turned Broil on, then pushed oven ...
...oven will not work on bake or broil but the stovetop works fine. Phillip, Check the attached links,instruction and guides, Good luck "I hope this helped you out, if so let me know by pressing the ...
...oven won't work. When I press the bake button and turn the temp setting to desired temp, it shows 'on' and the temp on the display for about 5-10 seconds and then turns off. Same results with the ...
oven wont bake The control buttons seem fine, but the oven doesn't heat. The broiler works though. The stove top burners work fine. All was well for years until this morning. In short. It won't bake. ...
...oven control which is the clock is bad. The relay for the bake element has probably gone bad and will need to replace the control. You should check continuity on the bake element. If it shows ...
...bake button the oven doesn't turn on. you have to press the broil button and even then it satarts at 100 degrees and barely goes to 350 Hi, The bottom element is bad...and not working... Check out ...
20 questions posted
Usually answered in minutes!
1,163 Questions
390 Questions
104 Questions
83 Questions
77 Questions