...ribbon connecting the Y Sustain board and the Top Y Drv board. For reference, the connection location on the Y Sus board is labeled P3. Does anyone have that cable ribbon part number? why are you ...
...be some parts going bad on the power supply board. In some cases I have found out that it was the ribbons connected to the actual plasma screen that are not connected tight enough, so when you
Question about Sanyo Televison & Video
i ve been reading about the ribbon an glue problem with the zif or tcon ribbons.what i would like know where is the glue spots are? so is it at the ends or what? i have taken apart the whole tv anthe ...
...it is very easy to damage the panel connections. You may try simply repositioning the ribbon cable to see if you can find a spot with a better connection. Please be sure to rate this solution.
Question about Toshiba Televison & Video
...self Looks like a Tconn problem caused by 1 Main Power supply inside unit 2 Tconn board itself, or ribbon cable connections 3 panel, or ribbon cable connections from Tconn to
Question about Televison & Video
...ribbon clamps and popping the ribbons out and cleaning both the securing socket and the connection pads on all ribbons carefully with a cotton bud and isopropyl alcohol, and re seat them, if this ...
...ribbon cable connection on the bottom will result in a vertical black bar though the screen. Many times resetting the connection will fix it, if the ribbon cable has been nicked there could be a ...
...ribbon cable connection on the bottom will result in a vertical black bar though the screen. Many times resetting the connection will fix it, if the ribbon cable has been nicked there could be a ...
...ribbon cable connection on the bottom will result in a vertical black bar though the screen. Many times resetting the connection will fix it, if the ribbon cable has been nicked there could be a ...
...material)over this area, this should apply pressure to the area of the ribbon that has a loose connection and hold it tight. The ribbon is bonded not soldered to the screen. Reassemble and
34 questions posted
Usually answered in minutes!
1,031 Questions
445 Questions
373 Questions
357 Questions
327 Questions