GE JGBP24 Gas Kitchen Range "xl44 oven" Questions

...XL44 oven won't turn off. Knob off and pin is loose GE XL44 oven won't turn off. Knob came off and the pin(?) is loose. Seems to be no gas shut off valve to the oven. Can I take the stove top off and ...

...XL44 Gas Stove/Oven and have recently noticed that the oven vent beneath the timer is putting out a lot of heat. I know it's suppose to put out the oven heat but it seems as if it has increased the ...

...xl44 gas oven/stove. I cleaned the I have a GE xl44 gas oven/stove. I cleaned the oven using the selfclean mode and now my oven will not work. Every time i turn on the oven the selfclean light keeps ...

...oven pilot I have GE XL44 how do I lightthe oven pilot Hi, The ignitor is not working right and is going bad.... have the repair man replace the ignitor, or DIY.... Check out this tip about your ...

...XL44 Oven Describe your GE Profile Spectra XL44 Gas Oven Problem: The oven takes too long to warm up. Like others, 45 minutes to get to 350. Any gas value to turn? My GE Profile Convection Microwave ...

...is a tip that I wrote that will help you with the Xl44 profile error codes. Oven Fault Codes for GE XL44 Oven heatman101 What does error code F0 mean on my GE Profile Range fL-148 drive model ...

...GE XL44... Oven does not work. It was working just fine one day & then would not work. Everything else works fine. Stove has electric ignitiion. Could it be it is not working on the oven? Any

xl44 GE GAS RANGE OVEN WONT WORK, RED LIGHT IN xl44 ge gas range oven wont work red light in comes on stove top work . What do I need to do Hi, The ignitor is not working right and is going bad.... ...

...XL44 gas stove/oven. We did some I have a GE XL44 gas stove/oven. We did some baking yesterday morning (no problems) and when I went to use the oven to make dinner it would not heat at all - can you ...

...XL44 oven JGBP26. I replaced the glow ignitore on the oven but still will not glow. I carfully tested the current to the ignitore and showed 125 volts, I also tested the resistance on the control ...