Canon PowerShot D10 Digital Camera "broken locked sd card" Questions

...SD card slot is broken or some how stuck? If you can try to look inside the SD card slot in the camera with a flash light, there should be a small clip like plastic to the left sticking out. That is ...

...locked Step 1 - Check to see if SD memory card or SDHC memory card's write protect tab is set to "Lock" - Unlock the write protect tab. Step 2 - Try another SD memory card or SDHC memory card to see ...

...is broken (it maybe from here) !!! any solution plzzzzz The SD630 works with SD cards. Your 16GB card is an SDHC card and will not work with this camera. You need to use SD cards, 2GB and

...protecting it from writes. The position nearest the contacts unlocks the card. There should be a small sliding switch on the side of the SD card. If the switch is broken, you can look here to fix

...Locked!. At first we thought the camera was broken and then when we realized both had been used in the frame we thought for sure the frame had corrupted the cards. Until we vistited this site we ...

...to the computer) Otherwise I think it's broken. Do you use a micro/mini SD adapter? If the contact is bad, it may tell you "Memory card error" and "card locked" at the same time. Check the

...locked but camera says it is The little slide switch may be broken inside the card. Do you have another card to try in the camera? If another card does work in the camera, then it's time to buy a new ...

...locked" downward position. The correct "unlocked" position should be slid up toward the direction of the connectors. If you discover that the locking switch is missing or has broken off, proceed ...

sd 750 cannon. when we lock the battery and momery card gate. there is a small huck which is broken.. can it be repaired Do you really need to repair it? If so, you need to be asking around your local

...broken off, and so was always seen as locked. I just read that solution from tdiddy!. Thankssssssssss :) so thankful that I just read that solution from tdiddy! had spent hours trying to figure that ...