...hot enough your oven/stove thermo-couple has gone bad and senses too much heat too soon before its actually hot and shuts off the gas supply,it is located inside the oven cavity in a clip on the top ...
Hotpoint gas oven I have a hotpoint gas oven and it takes forever to heat up (approx 45 minutes to get to 400 degrees). It makes a sputtering sound as it heats. I does not maintain the desired ...
...getting to the burners and oven. Only 2 burners can be used at the same time. The oven does not get hot enough to bake. so you stove was converted from natural gas to LP using WB28K10043 ...
...oven has worked at one point? Does the broil still work? This is my experience with my White-Westinghouse gas stove: The igniter bar is toast. There is 1 igniter bar each for the bake and broil (1 on ...
...hot ignitor. For broiler, just substitute the word broiler for oven. Old ignitors get " weak " and may not draw enough amperage to allow safety valve to open. Also, voltage will affect the amperage ...
...oven does not get very hot, the temp may be about 300 to 350 max. What can I do to increase the gas flow to increase the temp? I know by adjusting knob skirt I may be able to increase the temp +/- 50 ...
...Hotpoint oven and it won't get hot when I put it on the "bake" setting. It does warm up a little bit, but even after about an hour, it's still cool enough that I can touch the inside with my bare ...
Hotpoint RGB747GER oven does not heat properly. The oven temperature when read by meat thermometer place in center of oven is 1/2 of control setting ( i.e oven temperature set for 300 degrees displays
...oven lighting mechanism lights the gas the flames heat a temperature sensor that, once hot, increases the pressure in the sensor's copper pipe and opens a safety valve to allow gas to continue to ...
103 questions posted
Usually answered in minutes!
1,163 Questions
390 Questions
104 Questions
83 Questions
77 Questions