GE Spectra JBP78 Electric Kitchen Range "replacing hidden baking elements ovens" Questions

...few inches into oven. Disconnect wires. Reverse to install. Not too hard if it is an exposed element. A bit more involved on ranges with "hidden" bake elements (which are under the floor of the

hidden so I am unable to see if it is turning on. We have double checked the installation and it looks fine. When the bake element blew, could it have knocked out something else? My next though was to

Model MER57550AW won't heat beyon 200 degrees to prest 400 broiler seems to work ok(glows red). Oven won't go beyond 200 dgrees can you see lower (bake) element or is it hidden(under the oven floor). ...

...baking element from the bottom of the oven. Loosen two nuts to remove the bad element. Reverse the procedure to install the new element. You need to replace the bake element. You need to remove the ...

Oven won't come to temperature I have a Maytag mer5775qaf and we are having problems with it heating up (the oven). When I preheat it it isn't coming all the way up to the selected temperature. I ...

MER57550AWAW electric - won't heat to selected preset temp Oven preset to 400 degrees won't heat beyond 200 degrees. Broiler seems to work ok. Any solution? can you see lower (bake) element or is it ...

...hidden element that is the main element used for baking and cleaning. If its not heating then the element has gone bad and needs replacing. If you have a volt meter then you can confirm this by ...

How do I replace the lower oven heating element? Hello. Your oven has the hidden bake element. Are you SURE it's the problem--Many things can mimic a bad element. A thermal fuse might have opened, the

need to replace hidden bottom element on whirlpool gold GJP84900 how do i get to it OPEN OVEN DOOR, LOOK FOR SCREW HOLDING ELEMENT TO BACK PANEL, TURN OFF POWER, REMOVE SCREWS, SLIP OFF WIRE EACH SIDE

The oven won't come on! Checked the upper element with meter and shows continuity. Checked the hidden bake element andit was badly burned through/cracked. I replaced it. Turned the oven on and still ...