GE Spectra JGBP35 Gas Kitchen Range "low burners" Questions

...burners: from "High to Low". But, there is little difference in flame height between high and low. Compared to the other burners the oval burner provides a flame of "low" and one setting above low. ...

...burners low enough to simmer. Any way to further adjust burners for a lower "low" setting? Get the installation manual for your range, and find the part on adjusting the low heat for the burners. On ...

low, the burners may not function properly. Check the connection: Make sure that the connection between the hob and the gas supply is secure and not damaged. If the connection is damaged, it may cause

burners will not respond correctly to thermostat settings. (ie setting on low but burner will be red hot and burner setting on hot but will be low) The corresponding switch that controls the burner ...

burners are on low). In that case you need to adjust the burners (the directions are usually in the installation guide). With the exact model number, you may be able to find this online. In some cases

...burners have a low flame, even on "high". The flames are blue and uniform in shape however. I replaced the gas regulator and now the oven preheats in 10 minutes and works great. The stove burners ...

...low flames with two burners .10# propane tank full.Either burner one at a time has high flame.Once the second burner is lit the flames on both sides go to low . you have a gas flow problem check your ...

LOW FLAME ON GAS TOP STOVE Have a GE gas stove top burner model #JP979SEF2SS . One of the burner heads takes a few minutes to light up after the clicking and when it finally does burns with a very ...

...burners too high on lowest position (propane used) also, somewhat of a problem is necessity to depress burner knobs several seconds after igniting otherwise they go out. Remove knob, with flashlight ...

low heat, the burners go from high to low to medium to low as I turn the knobs from high to low. And when they're in a certain range, the flame height is very insensitive to knob control. Anybody have