...can be spotty with older ignitors, based on day to day (or even hour to hour) supply voltage to your range. 125 volts one time, 118 volts another, will make a big difference with a marginal
...time of day display OFF or ON in the display press and hold for 15 seconds (the control will beep once) and then release. This feature does not remove the set time of day from the memory of the ...
...time of day display off by pressing the clock button and holding for more that 15 seconds. (page 13-bottom, if you have a manual). She wants the time display on all the time...it displays for a few ...
ranges with electronic controls the time of day display can by turned off or on by holding the CLOCK keypad down for 15 seconds. Push and hold the CLOCK keypad. The time will appear for a few seconds,
time of day" 1. Switch on electricity supply to the appliance The display will flash 2. Press and release the time of day button 3. Set the time of day with the plus and minus buttons 4. The time will
...ranges clock reads FFF and the oven doesn't work. in the past I pulled the plug waited 10 minutes and the clock would reset the last time how ever it wouldn't reset How can I fix this Frederick H. ...
Jenn-Air Range: I am getting an F0 error. 2 times over the past 2 days my range has been beeping and displaying an F0 error. Any ideas? F0 is Function key faulty. Replace touch pad or clock assembly ...
...keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.Thank you for using Fixya, and have a nice
GE Kitchenaid gas range: When I unplug the range to clean; then plug it back in, how do I reset, so it operates normally. Simply re-set the time of day on the clock.
1,583 questions posted
Usually answered in minutes!
390 Questions
104 Questions
83 Questions
77 Questions
70 Questions