GE Profile Spectra JGBP90 Gas Kitchen Range "range keypad working" Questions

...range top controls ) but the oven won't shut off and the controls are not working for the oven. Hello, Here is what my online service manual for the F2-EO error code says F2 - E0 Shorted keypad ...

range is indicating a keypad failure or an Electronic Range Control (ERC) board failure. The ribbon connector on the keypad could be damaged or shorted. One of the buttons could be stuck or shorted on

...working F2 - E0 Shorted keypad (also called touch pad) 1. Check keypad connector for firm connection (keypad connects to control board). 2. Press CANCEL. If error code returns after 60 seconds, ...

Range top works without any problems. Power reset did not help. Any ideas? Thanks you. If you where to touch bake, does the unit turn on? Or is the keypad none responsive? I would say if the keypad is

...range is quite old and I do not have a manual. What does the error mean? Shorted keypad (also called touch pad) 1. Check keypad connector for firm connection (keypad connects to control board). 2. ...

display reads EO -F2- stove top works, oven will not F2 - E0 Shorted keypad (also called touch pad) 1. Check keypad connector for firm connection (keypad connects to control board). 2. Press CANCEL. ...

...Range keypad partially not working Have a Whirlpool GW397LXUS gas freestanding range. several buttons of keypad don't work. Have tried unplugging for 20 minutes then replugging with out success. ...

...range says EO F2 and will not turn on and none of the buttons work. What is wrong? That error means you have a shorted keypad. Check the keypad connector for firm connection (keypad connects to ...

keypad worked for a while. Then error message F2:E1 came on. When beeping started I would unplug the range, sometimes for all day. Sometimes when I plug it back in, it will work for a day or two, then

...keypad stopped. I turned off the electricity to the range waited ten minutes than restored the electricity on the fuse box. It worked! It is a computer and as all computers it needs to be rebooted ...