2007 Ford Crown Victoria "u1900 abs code" Questions

Ad

U1900 code and can not communicate with the ABS module or the fire suppression system module. Any ideas where to start on this? This is a problem I have never tackled before. check for bad ground open

Ad

Question about Ford Crown Victoria

1 Answer

ABS Module TC ON/OFF Switch Stuck Failure Go To Pinpoint Test H . U0073 CAN Bus Control Module Communication Bus Off REFER to Section 418-00 . U1900 CAN Bus CAN communication Bus Fault - Receive error

Ad

Question about Ford Crown Victoria

1 Answer

...ABS Module REFER to Section 418-00 . U1900 CAN Communication BUS Fault-Receive Error Instrument Cluster REFER to Section 418-00 . U1900 CAN Communication BUS Fault-Receive Error Trailer Brake ...

...ABS (Anti-lock Brakes) Light ON Wrench Light On U1900 Ford Description The Anti-ock Brakes System (ABS) module, the Powertrain Control Module (PCM), and the instrument cluster communicate over the ...

...U1900 CAN Communication Bus Fault-Recieve Error ABS Module REPAIR all other DTCs first. CLEAR the DTCs. CYCLE the key OFF then ON and wait 10 seconds. REPEAT the self-test. If DTC U1900 is still ...

...front, new rear. Get diagnostic code U1900 and U1262 front car. You probably have a wheel speed sensor issue. With the proper scan tool that can access the ABS module it will tell you the exact

...U1900 CAN Communication Bus Fault - Receive Error ABS Module REPAIR all other DTCs first. CLEAR the DTCs. CYCLE the key OFF then ON and wait 10 seconds. REPEAT the self-test. If DTC U1900 is still ...

Question about Ford Crown Victoria

1 Answer

...ABS, Traction Control and Brake warning lights come on intermittently and sets hard codes P1100, U1040, U1041, U1059, U1073, U1900 and U2013. Three trips to the dealer have not solved the problem. ...

...ABS Module REFER to Section 418-00 . U1900 CAN Communication Bus Fault-Receive Error Instrument Cluster REFER to Section 418-00 . U1900 CAN Communication Bus Fault-Receive Error SJB REFER to Section ...

...ABS codes, U1900 is the first one, and still getting P0506 plus 3 others for the throttle body. From reading internet sites, this happened to several folks when replacing the battery. Dealer ...

Not finding what you are looking for?
2007 Ford Crown Victoria Logo

8 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...