2005 Chrysler Town and Country "check engine light problems" Questions

...check engine light is on what is my problem please help You need to get the codes that are stored in the cars computer before figuring out what the problem is? The check engine light could be for ...

...Check Engine Light · ?- Stuck in the Same Gear Signs of a Bad Transmission Control Module & TCM ... https://www.mytransmissionexperts.com > signs-of-a-ba... Oct 28, 2019 - Signs of a bad ...

...check engine light comes on with traction control and electronic throttle light. max speed 25mph You can go faster if you put it in neutral turn engine off . Restart in neutral and put in drive. It ...

...check engine light came on along with the traction light. Put it at a scanner and this PO339 code came on along with PO300. The mechanic changed the crank sensor but nothing changed. Help please... ...

...check engine light on .. you can take your van to most auto parrts dealers to have the computer checked for "fault codes" (usually free) .. that should give you an idea about what is going wrong ... ...

...check engine light went on I took it to autozaone and they told me it was a speed sensor this was the only code that came up, I didn't fix it then, the light went off and the van ran good for two ...

...check engine light, check for codes anyway as there may be a code set. other things are bad ignition wires, coil pack, lose of power to coil pack, no ground for coil system, the PCM controls ground ...

...restore the power back to the battery it used to start the engine. Also, have your charging system checked for proper operation. Your alternator should charge between 14.2 to 14.8 volts at all times ...

...check engine light to check for problems ,like a transmission sensor, on a 2005 chrysler town and country. if so how do i go about doing it On many vehicles the onboard computer can read by a plug ...

...check engine light comes on p 0700 comes up and transmission seems to be stuck on second gear (limp mode) now from what i understand i got to take it to a transmission specialist so they could read ...