...and proceeded to fix the problem. Now then right next to the thermostat houseing there is a small hole and now there is coolant leaking out of the hole and I would like to know why there is coolant ...
fuel hole opening is blocked by metal flap gas nozzle will not go into hole as the metal flap will not move. Can not fill up gas at this time. My car just recently did this and wanted to know if u ...
antifreeze is leaking bad in 2008 dodge charger older model water pumps had what was called a weep hole under the bottom just below where the shaft goes into the pump when the pump is going out ...
...to change the oil pan on 2006 dodge charger sxt Oil pan plug stripped bad and mechanic says the whole oil pan needs to be changed. You can purchase universal drain plugs at about any parts store ...
my defroster in my 2006 dodge charger is not blowing hot air could be the firmostat sticking or a fuze could allso be the hole heater matrix packing up thanks ben
Question about Dodge Charger
Fuel hole opening is blocked by metal flap and will not move. how do I fix? do you mean in the filling pipe , this is usually just depressed when putting nozzle in when refueling try giving it a push ...
...that are contained inside the rotors by adjusting the star wheel that gotten to through an access hole in the backing ...
...ky, they sold me a exhaust adapter to slide into the exhaust pipe and i just had to drill a small hole and add a screw to hold it into place. it sound like a v8 with a large
...is to, valve body off, use a variable air gun on different ports to apply them. There is a hole by each servo to check the band. There are holes along the front side of the case where the VB ...
i have a 2009 dodge charger. I wanted to change my intake to a cold air intake. i notice there a hole where the original is at on the bottom. Does that need to me covered or not? in my opinion about ...
11 questions posted
Usually answered in minutes!
699 Questions
164 Questions
66 Questions
66 Questions
43 Questions