GE 30 in. Profile JP350 Electric Cooktop "burner light turn" Questions

...light Left burner does not apper to spark, but lights If you turn on both bruners they some times light??? The igniters for the burners are all on one circuit so when you turn the burner to light the ...

...light the burner. Normally when you turn the burner on you should here a snapping or sparking sound, at which point the burner should ignite. Here is a link to the user manual for 36" - 5 burner ...

...burner I try to turn on, the same one tries to light - I thought the gas was turned off, but the fact that just the one burner tries to turn on makes me nervous. thanks Hello- On modern gas cooktops ...

...burner will not light After our stove was cleaned, a lot of cleaning solution was left behind. Now one of the burners will not light. We have removed most of the excess cleaning product. The other ...

...way to get the burners to light is by slowly turning them on until they light and not pay attention to the "light" mark. You might need to turn it just past the "light" mark for the burner to come

turn off The igniters on the two right burners keep clicking even after the burner lights. The igniters on the left side do not come on. However if you turn on the right side and after it lights, then

Burner light does not go off on Amana AKT3040 I have an Amana AKT3040 and when I installed it one of the burner lights in the set of four in the middle of the unit always stays on. All four light will

Burner won't light When turning on the stove one burner will not light even though the ignitor clicks when i turn on the right front knob, it clicks and sparks but no flame, if i turn it on and light ...

...light the RR burner, I have to turn RF knob to "spark" and simultaneously turn on RR burner. The unit is 3 yrs old and the RR burner has always been a little "touchy" when lighting. Only in the last ...

...burner won't light unless gas is turned down to the low position. I have a glass cook top (JGC9536) with a problem at the right front surface burner (12,500 btu). I used to be able to just turn the ...