GE Profile JGP636 Gas Cooktop "hot enough" Questions

Ad

...hot enough. Replaced both plates changed, but still have same problem, not getting hot enough. What can problem be? Plates are getting hot but not hot enough to boil a pot of water. Could it be a ...

Ad

Question about KitchenAid Cooktops

1 Answer

...hot enough like before, the flaming is smaller than before Hi, Your problem could be or probably is with the regulator...not enough gaspressure... Propane, LP, or Natural Gas Regulator Problems ...

Ad

...suggestions? the contact may be loose but most likely the burner needs to be replaced. the one you use the most usually goes first, and not getting hot enough is the common indicater of a shot ...

...and i do not believe it even gets hot enough to boil water. why any help? i have had it in storage now for a year or more and warranty is void already. hi there, are all of your elements not

Question about Kenmore Cooktops

1 Answer

...hot. This problem just started. Thanks for your help! you have a bad switch. You can check each switch for voltage going to the light one at a time, if your comfortable with that. Remember there is ...

Question about Jenn-Air Cooktops

1 Answer

...hot enough, then the main reasons for that are: Escessive air movement across the grill. Surface controls may not be properly set. and the voltage maybe low. But if is not getting hot at all then you ...

...hot all the time no matter the temp setting. I bought a replacement switch for my original part number, 8053837 , and go to install it and find that the installation instructions for the replacement ...

front controls - the flames seem smaller and does not seem to get hot enough to boil water in a timely manner Remove the knob and using a tester turn the screw inside to increase or decrease the flame

...hot enough to fry foods. Burner continues to re-cycle on and off while switch is on high. Burner gets red hot for a few seconds then turns off for a few seconds, then back on. You may have a cracked ...

Question about Jenn-Air Cooktops

1 Answer

...HOT ENOUGH THAT I CANNOT LAY MY HAND ON IT. THIS UNIT HAS A SECOND GRILL THAT WORKS FINE. ANYONE KNOW MY PROBLEM? bibman: Sounds like the control switch or possible loose wiring. Take the element out ...

Not finding what you are looking for?
GE Profile JGP636 Gas Cooktop Logo

193 questions posted

Ask a Question

Usually answered in minutes!

Top GE Cooktops Experts

Cindy Wells

Level 3 Expert

6688 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a GE Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...