GE Profile JGP636 Gas Cooktop "clean under burner" Questions

...burner. When using the other burners the igniters keep sparking after being lit. What do I replace? All the igniters will continue to spark until the knob is turned further to the desired ...

under two of the burner knobs and three of the 5 burners. Thoroughly cleaned unit, which was already clean and smell persists. Any suggestions? what smell? electronics, burnt toast, dead rats? updraft

...clean your stove recently? If the switches under the burner knobs get wet they will cause the burners to click. Unplug the unit or shut off the power for a day. Once the swithes dry, it should work ...

...under the knob and into the contact that controls the spark. The knob zapped several times as I tried to clean up the hot tea. Now that the stove has dried out the one knob will not start the spark ...

...clean everything under the knobs. It is important that the switches ( vertical bars that go under the knobs) can move freely up and down. I think that the clicking is triggred by the switch being ...

...clean the sealed cups around the burner which are under the cooking grate and I added soapy water and let it sit there for a while to loosen the ground in burnt food stains. It appears some of the ...

...clean and it is not that old.....kept as new! is this a sealed burner unit? if so the burner base (the heavy brass part under the burner cap) has to be sitting just right. you will notice that it has ...

clean out the burner holes and NOT a tooth pick as these can break off and make things worse. Example of a burner. The next thing to check for are the ignition switches under the surface control knobs

under burners, in rear = $500 - $600. Burner bases = 400 - 600 depending on number of burners and if it is with a venturi or screws. Good luck. it could be the electrode that ignites the burner is not

...clean under the electric elements on my basic westinghouse stove Westinghouse stove - how do I lift up the cooktop in order to clean under it Hello friend, thanks for your post! I understand that you ...