GE GDS18LBR Bottom Freezer Refrigerator "screwdriver remove cover profile" Questions

Ad

...screwdriver and 1/4" socket. First unscrew the plastic covers at the top outside corner of each door then remove the bolts under the covers. Disconnect the cable leading to the left foor. The doors ...

Ad

...screwdriver into the gap I created. The plastic covers snapped right off without leaving a trace of damage. I tightened each screw and snapped the white plastic covers back on. Handle looks great and ...

Ad

Question about GE Refrigerators

1 Answer

...screwdriver , pry the control panel ( from the bottom only ) outwards . This panel is the push buttons for crush , cube , water . Once removed , there are 4 screws , one on each corner of the white ...

...remove the plug and with a flathead screwdriver turn slowly clockwise until the compressor stops. This should put the refrigerator into defrost. After about 25 minutes the timer should turn the ...

Question about Refrigerators

1 Answer

remove the cover. 5. With a pair of pliers, twist off the backing plate tabs located on either side of the crusher. 6. With 2 small flat-blade screwdrivers, unlock the ice crusher locking tabs located

...Remove the circuit board. Check the solder connection behind the relay. If you see any black residue around the solder connection you will need to clean the area with a screwdriver and re-solder the ...

Question about GE Refrigerators

2 Answers

...Remove the clear inside cover of the crusher assembly and the "C" clip on the threaded end of the auger shaft to separate the auger from the crusher. And now for my PRIMARY reason for sharing my ...

Question about Refrigerators

1 Answer

...Remove the access panel in the freezer section to expose the evaporator coils. If the coils in the freezer section get plugged up with frost, this frost will block the evaporator fan motor from ...

...Remove the access panel in the freezer section to expose the evaporator coils. If the coils in the freezer section get plugged up with frost, this frost will block the evaporator fan motor from ...

...remove power to the dispensor . Using a screwdriver , insert it just behind the dispensor board , and twist , to pry the board off . Remove the 3 plugs there , and remove the board . Remove the 4 ...

Not finding what you are looking for?
GE GDS18LBR Bottom Freezer Refrigerator Logo

93 questions posted

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Johnny 1000

Level 2 Expert

94 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...