...to terminal 3 on the switch. If the fan runs fastest when the switch is in the number 2 position, the wires most likely need to be switched. Again, just my thoughts. Let me know if you have
Question about Hampton Bay Dryers
20 year old Hampton Bay fan requires new 3-speed pull chain fan switch replacement. I did not copy the wiring pattern for the L, 1, 2 and 3 positions. There are 3-wires: black, white and blue. I need ...
3 spd switch. The replacement switch has a pair of connections at each position; you would assume the two connections are electrically tied together, they are not. The switch assembly actually has two
...3 positions, and then turns off at position 4. mcdevito75 here Chances are the switch to change the fan speed is faulty, contact Ellington or see any store that sells ceiling fans for replacement ...
looking for switch Need more info! make/model of fan would help! If the switch is a vertical 3 position switch it reverses just by pulling it up to the next position. Low = Off, Middle = CW, Top = CCW
Question about Monte Carlo Dryers
3 speed switch. I replaced the switch which was slightly different than the original. Now the fan has only two speeds, low and high. Two positions of the switch set the low speed, one position sets it
...position of that switch it activates both 2 and 3 (or medium and low) Be sure you have a switch which operates as such L+1 L+2 L+3. If you have the proper switch, then all you need to do is connect ...
3 speed ceiling fan I hooked up a used ceiling fan, I got it to work but I only have one speed. All three positions are on high speed and off, only. How do I rewire the switch to work with all the ...
Question about Hampton Bay Dryers
...wire going to reverse switch, one orange wire to switch 1 position, other orange wire to switch 3 position, red wire pigtailed to another red wire going into motor. bad motor "burned out"get a new ...
196 questions posted
Usually answered in minutes!
437 Questions
165 Questions
101 Questions