Hampton Bay 60 In. St. Regis Fan, Ancient Bronze "speed problems" Questions

...could the problem be? Several months ago replaced the speed switch with no problems, everything worked fine until about two weeks ago. Now slower than usual 2nd speed. Try a different speed

Only have 2 speeds on a 3 speed ceiling fan- replaced switch, no My granddaughter pulled the chain on our 3 speed Monte Carlo ceiling fan too hard which broke the 3 speed switch. I replaced the switch

Hi I have three new ceiling fans with a speed controllers (fan power is 220 V 50 Hz 80 , speed regulator 220 V 50 Hz 0.36 Amp,brandNational). And after installation; every thing is working right, the ...

Casablanca fan speed problem Fan operates by a wall switch with three buttons, light, fan speed, and Power. one touch on the fan speed normally gives low speed, then pressing 2 times gives medium ...

I have two of these fans. On one, the three speeds seem to work fine. On the second, when the pull switch is pulled once - for the fastest speed - the speed is slow; pull it again, and the fan speeds ...

When I select medium speed, the fan is running at slow speed. The high speed is still working. How do fix this problem? Is there a replacement part for this speed control circuitry module? Might need ...

3 speed ceiling fan I hooked up a used ceiling fan, I got it to work but I only have one speed. All three positions are on high speed and off, only. How do I rewire the switch to work with all the ...

Hunter ceiling fan-just installed -possible speed control problem Just installed a new Hunter ceiling fan Paramount XP 23248. Turned on fan from wall switch. Was okay, But when adjusting speed with ...

Speed control The speed control isn't working properly. It only goes at high speed. The low and medium speeds don't work. Where can I get a replacement part for the speed control? Thanks. try to clean

The middle speed on my 11 year old Hunter ceiling fan no longer works right. High speed and low speed seem fine, but the middle speed seems stuck on low. Because of this situation, I replaced all the ...