Rab Lighting RAB FF150 - 150 Watt - High Pressure Sodium - Flood Fixture - 120 Volt "little buts" Questions

inside the fixture. unplug the fixture and then see if you can bend the center "not" connector up a little

...opening, and place it over the opening. If that's too much effect, remove the tape, make the hole a little better, and re-apply it. If it's not enough, use a new piece of tape with a smaller hole. My ...

it out with a VOM - it should be on open circuit in good light and a closed circuit if ou cover the little winow with your hand.) Those are the two most common problems but, if the bulb and the sensor