Hampton Bay 24750 Huntington III Ceiling Fan "lighting kitchen" Questions

...lighting circuit.You need to disconnect the fan and wire in correctly.I would start at the kitchen light fitting as thats where the power to run the fan seems to have been taken from.It may only be ...

Two fans, remotes work with one, not the other We have two Hunter fans, one in the kitchen, one in the living room. The two remotes both control the kitchen fan, but neither control the living room ...

CFL bulbs for fan fixture My new 32 in 6 blade fan has an intermediate socket for the light. The largest incandesent light is 60 watts and I can't get a CFL to fit. I had a simple question and you ...

I have moved my fan from my kitchen to my office. In the Kitchen, the lights and the fan worked. I have moved it to my office and the fan will not work. I have troubleshot and have come with nothing. ...

Hi there, We have a celing fan in our kitchen it was in when we moved in (I believe it is about 10 years old) and for the last few years we have not been able to get the fan to work. It has a remote ...

Hi, I opened a junction box that operates 3 lights,from 3 diferant swicthes, there are red, white &blk plus ground i need to tap off of that & instal a gfi & vanity light w/s witch can you

Wiring new light over kitchen sink We bought a light fixture at Lowe's on the clearance table, the instructions are missing. How do I know which lead is hot and which is not? Typically, the white wire

My Mink Aire fan "ticks" in the cooling direction, but doesn't in the reverse direction. Ticking stops immediately upon cutting off the power. What could cause this? Might be wobbeling a little. Try ...

im taking out a switch in a four switch circuit we are remodeling our kitchen we took out a wall and have switches that need too be removed. one circuit for a light has four different switches that ...

Hello, All of a sudden my kitchen ceiling lights are acting flakey...here is the problem. There are two ceiling fixtures, both of them were controlled by two separate on/off switches on opposite ends ...