Hampton Bay (261025) Dual Mount Ceiling Fan "wires switch" Questions

...switch and wires that go to the fan.Power wires are one black and one white. The other wire is a green ground wire. Remove the wires,one at a time and connect to the switch,IF there is enough wire ...

...wires in the switch box (2 black two white), then they brought the power into the switch box, tied the whites together as neutrals and connected the blacks to the switch. So then up at your fan the ...

Wiring/Replacing pull chain ceiling fan switch I am replacing what appears to be a 4 position pull chain switch in a very old ceiling fan. The old switch has a black wire(in switch port labeled ''L'')

...from the ceiling fan switch, the light wire (blue) would connect to the switched red wire from the light switch and the neutral (white) and ground (bare) would connect to the their associated

...switch, the wires coming off the motor go into the switch, if you have the light and the switch that run the temperature you can take that out and just run the wires direct to the switch and follow ...

...wires. Can I use the 3 wire switch? If so how does it wire up? Kind of hard to be 100% sure without seeing the switch, but seems like the old switch was a simple single pole on/off switch while the ...

...switch(es) near a door(s). Use a meter or tester to determine which wires are switched (probably black or red) and unswitched (probably black but may be red, too). Label them or orient them in such a ...

...switch wires. that is: wire # 1 from the switch goes to the black wire from the wall--ac hot wire #2 from switch goes to yellow fan motor winding, wire # 3 from switch goes to orange wire from fan ...

...switch connects to the black/blackwhite fan wires - connect all reamining white wires together in bundle - connect all ground wires together It's that simple. Trick is figuring out, of the three ...

...switch you are removing? most likely the black wires are grounds for everything and white would be power. hook it up however you like. white power would hook up to the black wire on the switch and ...