GE GSH22JFR Side by Side Refrigerator "tightening fridge door" Questions

fridge door handle? The bolt on the handle tightens on a pin that comes through the door. If the tightening the screw on the handle and it still does not tighten then the pin has come loose inside the

...door thanks just advice it's not old just loose Fridge doors normally have two screws on top of the door and another two screws under a cover on the face of the door. Tighten then just enough to snug ...

...fridge door handle loose 4 week old fridge, we love it, but the fridge handle is loose and getting worse. it's a fridge on top, freezer on bottom. i can feel small holes along the bottom of the ...

...tightening/loosening the screws on the mount at the top of the door(usually under a cap that is the same color as your fridge). You want the door open when you adjust the level of the door and ...

...fridge door will not stay closed. I changed the gasket, tightened the door screws, cleaned the contact area and it still pops open. After all the good ideas you've already tried, the next things ...

Fridge door not closing 100% at the top. Hi I have a GE profile fridge with the freeze on top. THe fridge is only 3years old in really good condition. The fridge door is not closing 100% at the top. ...

fridge door seems to have move downward a little and preventing the dor from closing tight tried to tighten the screw on the dor but it is only detaching the door from the fridge Take the door off the

...fridge door does not line up to base of fridge have to lossen the fridge hinges and re tighten them when its alligned up, sometimes if someone like kids play and hang on the doors it throws them out ...

...pushing it towards the fridge and jerking it down. You make want to protect the fridge above and below were the handle attaches so you don't scratch the fridge door when pulling the handle on or

...fridge and the handle to apply pressure against the tab from the sides and from the top. My model's tab released from firm, downward pressure. I repeated for the 2nd lower tab. Only then, could I ...