GE Profile PSS26NGS Side by Side Refrigerator "replacing icemaker until new ice" Questions

until we shut off the icemaker and also the main water valve when we went on a 4 week vacation. After coming back I turned on the main valve, installed a new ice maker filter and flushed that. Then my

...Icemaker removed inspected and reinstalled, nothing. On these models I've noticed that the temperature in the ice maker area warms up due to a ball of ice forming inside the freezer compartment ice ...

icemaker was not on. It would not stop until I disconnected the water supply. Can someone please help? Try buying a new ice maker kit and replace it by doing it yourself. This would help you in saving

...icemaker on it climbs again until I turn off. Originally it would be slow making ice and would not freeze new food but was maintaining already frozen food on shelves. Nothing on door would freeze. ...

...until now. If I turn the icemaker off, will that stop water from going behind the back panel? sounds like the fill tube on the ice maker may need to be replaced or adjusted.but you need to make sure ...

.... If it stays off , icemaker is bad . If you close the flap on the left side of the freezer , the light should go off , until you release the flap . If these factors are ok , then the optics are ok

replacing the solenoid valve would not solve anything. About the only way you cold diagnose this without tearing the icemaker apart is by putting an elctrical meter in the solenoid valve and obseve if

...new sxs with ice & water dispensers. Same here, water and no ice being made. I replaced the filter and it's making ice again. My GE gss221frfcc ice maker and water disp. is not working. I was able to ...

until last fall when the overload relay was replaced. At the time the Sears service guy noticed the copper water tube to the icemaker was bad so installed a new plastic one. Ever since then the ice is

...icemaker starts wait until the ejector blade gets to 10 oclock position this is where it calls for water. The test would be unplug the coil on the valve and put a meter lead on each one. If you see ...