GE Profile PSS26NGS Side by Side Refrigerator "circuit board recall" Questions

...circuit board is making a clicking noise... I I took the panel off the back of the fridge as I followed the noise to the circuit board. The circuit board is making a clicking noise... I think the ...

...circuit board also located in rear, I unpluged the quick connector to the fan and clicking stopped and compressor started , do I need a fan or a circuit board, I had the same problem back in March. ...

...circuit board. Turns out there was a problem with the controler board and after some research I found that the board was covered under a recall. GE ended up sending a guy out to replace the board at ...

...circuit board in side the top of the refrigerator, how can I get to it to see what the problem might be? thanks for your help Gordon Heitlinger Scottsdale, AZ The dometic recall requires the ...

...recall.php There are places that repair them, but it's usually smarter to replace it in the long run. For a few hundred bucks more, you get new warranty, new circuit boards etc., that are most likely ...

...circuit board. If the 12v power goes straight from the connector block to the board then the safety recall has been bypassed and must be reconnected. The recall is a free kit offered by Dometic and ...

...circuit board on a limited number of refrigerator models, which could lead to lower than anticipated life expectancy on that component. Therefore, if the main circuit board fails, GE Consumer & ...

and has a sticking relay for the light circuit, needs board replaced. the 3 beeps are the unit thinking it has a door open. turn off the alarm on the door control board and call sears 800 # for repair

...circuit board on the back goes bad causing the ice\water dispenser to quit working then eventually the fridge quits cooling. Call 800-386-1215 and tell them the problem. There is a recall for the ...

...circuit board worked ok for 30 days now open doors and says off in display, press minus button turns on for a while then turns off again. need help. I would recall that GE repairman. Most likely the ...