the two screws now you can remove the cover. The damper is just held on by a clip an each side. Here is the part Control, Damper Part #: 67003903 Thank You and please rate my answer if it was helpful.
Question about Refrigerators
...Remove the auto damper control rod retainer, control rod and the slide control gear from the auto damper control. 9 Now turn the control housing over. 10 Remove the two auto damper mounting screws, ...
Question about GE Refrigerators
...remove the damper assy.pop off the cover on the piece that runs up the back center,remove the screws to the damper,read the instructions and put it back together again.should take you around 45 to 60 ...
Question about Jenn-Air Refrigerators
...damper control is not working but I cant get to remove the cover in order to replace it I am trying to get to the auto damper control on a jenn air JCB2389grs. The cover that goes over the part has 2 ...
remove this cover to investigate ? This isn't related to the compressor cycling -- it's seems to be on it's own cycle. this is your damper control it is a lil door that is being pushed ipen and closed
...remove the damper fan assy.look at the instructions,the one i worked on i had to remove the gasket that's on the freezer wall side and replace it with the fat gasket in the box and then put it ...
...remove and inspect the damper door,it has probably broken and has jammed open as this is a problem with g.e. side by sides,when taking out damper door module be careful as theres a small 4 wire cable ...
...remove the food from the top shelf. The damper control is in the box near the top of the refrigerator section behind the temperature control knob. Remove the knob and cover until you can access the ...
...egg shells. I removed the vent cover and reattached the spring from the damper door to the Damper Control assembly side and that returned the Refrigerator side to normal operating
48 questions posted
Usually answered in minutes!
3,171 Questions
927 Questions
305 Questions
304 Questions
262 Questions