GE (PSS26MSRSS) Side by Side Refrigerator "testing temp sensor ice maker" Questions

...temp and ice melts. Verify temps, verify its a ice maker issue by turning off the ice maker to rule out the issue. It could be an ice maker issue, but i am not quick to throw parts in without ...

...warm air to seep into your freezer. You will see where your temp sensor is located by clicking into the site of a parts supplier like ShopJimmy.com and pulling up their photo of the guts of your

...temp (0.5ohms) and after dipping in ice water (0.8ohms) i think there working... the evaporator does not get cold too,...What could be the problem here? (the ice maker works fine too) Model

temp sensor issue.Needs to be tested and faulty part to be replaced. Replacement parts can be purchased at any of the following web sites: searspartsdirect.com pcappliancerepair.com appliancepartspros

...sensor are these integrated on the ice maker assembly? I ask because I have one that GE sent me a while ago when I had a problem with the tray. They sent the tray bucket and the ice maker but I only ...

...temp of the ice is around 10 degrees so if the freezer is at 15 or 20 due to some other malfunction then you will see the maker full of ice but it wont harvest and make another batch. so you could ...

...temp sensor. but it still wont cool. But strangely last night I toggled the switch on the ice maker again on then off and the fans kicked on again, but not for long. Weird. Sounds like one of two ...

...ice. I've changed the two Temp sensors and the defrost thermostat. Still the same problem. What should I do next ?? Ice Maker Is Frozen Up This ice maker repair is even easier. If your ice maker has ...

...temp windows and the side that it appears on. Then see the Control panel LED legend along with the corresponding position legend listed below listed on page 30 for interpetation. This should tell you ...

...Temp is low enough, checked that already. We tested the maker by pouring water directly into the ice tray and it froze and dumped into the ice bin. So, everything seems to be working properly except ...