GE GSL25JFPBS Side by Side Refrigerator "replace light bulb water dispenser" Questions

...control panel. Remove the light bulb by turning it counterclockwise. Replace the bulb with a bulb of the same size and wattage. Plug the refrigerator back in and you are ready to go! Thanks, Sea ...

...light in my water and ice dispenser needed to be replaced. When I replaced the bulb the bulb blew and I lost all power to my dispenser panel. Did you replace the bulb with one of the same voltage ...

...I have the Amana side by side, how do I replace the night light bulb for the water and ice dispenser? look up inside the water and ice dispenser and after you see the bulb...replace it with

...light on our in-the-door ice and water dispenser was burned out when we moved in. I pulled the bulb, went to the hardware store and got a replacement bulb. When we went to install the new bulb, there ...

...light bulb won't light up! I removed the light bulb and tested it --it checked out OK. Is there a switch that could've gone bad on the dispenser? possible bad switch, but that would only control onr ...

...bulb current is inconstent, light dims when dispense lever pressed - again wrong current draw). Good luck 1) Electric Water valve check up. 2) Water/Ice dispenser control check up 3) frozen plastic ...

...light bulb does not light, the panel LED lights do not work, there is no noise or fuctions when the buttons are pressed. Otherwise the refridgerator works fine--ice maker works, etc. Does not appear ...

light to the water and ice despensing . there are a lot of problems with this board and there not cheep from 65.00 to over 100.00 . i would wait untill another part of it fails ,and it will your water

...replace light bulb Hi, The light bulb for the dispenser is a small night light (Christmas tree) bulb. It is usually 25 watt, but check the one you take out for sure. You will have to look up from ...

...light bulb broke in the socket on the ice/water dispenser on the door - need to find out how to remove the cover housing for that unit to be able to remove the bulb base or replace the bulb socket. ...