GE GSH25JFR Side by Side Refrigerator "button getting stuck ice" Questions

...Thanks! make sure you remove the ice bucket when you press the reset button. if the ice level arm gets stuck it will not rotate. also if the rotating spindle at the back is jammed nothing will

...button it lit, we can only get crushed ice. It is like it is stuck in crushed mode. Any ideas would be greatly appreciated. Thank You Jeff jeff, at one time the ice bin was removed and there is a rod ...

stuck in crushed mode. Most likely it is the push button control. It is expensive to replace. Try tapping on the control lightly to see if the wires just may not be making good contact. May need to be

...button is on cubed ice Pull the ice bin out and you'll see a rectangular hole with a plastic piece that has a rectangular hole in it. This piece will correspond to a steel rod that runs along the ...

...for a while and now it doesnt' work. Thanks for your help! No button to push. It sounds like the solenoid valve which opens to fill the ice tray is not working. Not getting power, stuck,

...Ice lever dispenses whole ice cubes with a few ice splinters. hi there, could be that the ice maker arm is getting stuck or may have some frost on it. can you supply the complete model #

...is a lock button that will stop the ice from comming out then check the pad that you push on to get the ice and see if its stuck in , there is a switch behind the pad and it will need to be ...

...stuck or you have a bad microswitch behind the dispenser. To stop the ice/water from dispensing open the freezer door and press or hold the child lock button down. Once the unit is in child lock mode ...

button is lite but the only dipenses crushed ice ice maker is stuck in crushed ice mode will not swith back to dispensing cubes. We have had this problem on occasion. The lever up in the ice dispencer

...side refrigerator , the ice bin will not detach, stuck I pressed the button on the left side and pulled up, then the button fell inside and I cannot get the bin out. defrost ice bin then remove ...