...box of this unit. You may have to remove a cover plate to get to it. It will either look like a small probe or small diameter copper pipe (real small). It will either be close to the pilot or ...
Question about Williams Heating & Cooling
working this weekend. With our previous heater we were able to have heat even of the electricity went out. Thanks for your help, Janice Williams heaters have a manual reset for the spill safety switch
...working. also the knob does not pop out when on. I can help with part of this problem. The thermocouple is a sensor right next to the pilot flame. When heated by the pilot flame, it generates a small ...
...got tipped over now wont heat. It lights up when I power it on the display works, no HEAT. I have 5 small grandsons that live with me and this heater was quite expensive I need it to work and ...
...yesterday. Worked fine for a few hours before quitting and displaying the E3. If you place a small fan behind the heater where the controls are it should quit stopping on you. There is a small ...
...small clicking sound if it is working. You may try to clean the nipple that the hose attaches to on the idm housing with a small piece of wire. Also make sure your flue pipe is not restricted in any ...
small temperature safety relay mounted slightly above the ceramic heating elements. Its purpose it to shut off the elements if they overheat, which I would assume would happen if the fan stops working
Question about Mr. Heater Heating & Cooling
Small Pilot flame on MrHeater MHBF20lpt & pilot won't stay on. It is very hard to get the pilot to lite and if it does it will not stay on for long. I have read many posts here and have cleaned ...
...small opening where the tube came off. Sometimes this gets clogged and causes the same issue. Other than that, it can be a blocked flue or the inductive blower motor itself is not working properly. ...
209 questions posted
Usually answered in minutes!
45 Questions
30 Questions
22 Questions
20 Questions
8 Questions