GE Profile JTP56 Electric Double Oven "temp display" Questions

display lights are fading to nothing? how to get back to normal level? I set the oven temp, but can't see the temp displayed. Help. hi the only to fix it is to replace display/control jim

...Temp" I get a blank display. Then I click the up arrow and it displays the desired temperature. After that I don't know what to do. The display goes back to the time and nothing happens. I found the ...

Display continues to read 300 even as oven cools down. If I then increase the setting to a new higher temp such as 325, the element comes on until it reaches 325, then shuts off and does not come back

display not workin neither the element or fan in bottom oven working The fuse could be blown in the oven control wiring IF the temp inside exceeded that of recommended temps usually if the oven was in

temp/clock display faded i have a therm double oven scd302zp and the digital display numbers are so faded that I cannot see the clock when oven is off and cannot see the temp settings when trying to ...

temp/clock display faided i have a scd302zp double oven and the digital display light has faded to the point that i cannot see the temp settings/clock etc. is there an adjustment I can make behind the

temp display too dim to read The oven & controls work but the digital display (temp, broil level, preheat) has faded away completely. Do I need a new fuse? The electronic control board will have to be

...2000-893 DOUBLE DECK OVEN GIVEN A FAULT OF PHE.... WHAT DOES THIS MEAN? ON START UP WHEN OVEN IS COLD IT WIL DISPLAY PHE TIL IT REACH A CERTIAN TEMP IF IT KEEP ON DISPLAYING PHE REPLACE YOUR TEMP ...

display says it's still on. There are no error codes. I replaced the temp sensor but that did not help. Using an oven thermometer I checked the temps, setting the oven at 350. After 10 minutes the

...display shows temp Celsius press it again for 5 secs display shows temp Fahrenheit, press off/cancel to store I hope I have been of help but please do not hesitate to ask if you have any further ...