GE JKP85 Electric Double Oven "remove gas stove" Questions

stove from gas to lp do we need to open top of stove to do this? Only if it is an open burner stove. Sealed burner stoves are converted without removing the top. Which do you have? Your owner's manual

...gas to the stove. Remove the oven racks. Remove the bottom oven pan. Remove the flame spreader. This gives you access to the glow bar and gas valve. Put a clamp on amp meter around one wire of the ...

...gas valve. UNPLUG the oven. Remove the floor panel in the oven and you sill be able to see the ignitor. This is very common with gas stoves. I hope this helps you. Please let me know if I can assist ...

...gas fills the air, but I get no heat?? You probably have a week oven igniter. Unplug unit first!! Remove oven floor. Remove flame spreader. Igniter is attached to side od burner tube. It removes with ...

...Gas Oven stopped working.... the electronic panel works along with the upper (4) burners... Model 362.75371690 Remove the bottom panel from inside the stove. Turn on the stove and see if the igniter ...

...gas valve. The most common issue with these ovens is the ignitor. It can glow red but not be strong enough to open the valve. Remove the bottom panel in the oven and you can see the ignitor. I hope ...

...stove to gain access to the pilot light but I am not sure what part to light. Please help me. Hello, This is going to be a problem with your igniter/glow bar. Over time these get old and although you ...

Gas stove - 11 years old - ARG7301WW Serial #9704178428. Recently whenever I cook something at 400 degrees or higher, smoke pours out of the stove from inbetween the liner. Even when I remove the food

...gas back on. Re-light the pilot (if it has one). 9) If the oven still doesn't work, call an appliance repairperson. You will need a T20 screwdriver (star shaped) to remove the back plate on the ...

I have a new Smeg stove and can't get the gas oven going. The stove should have a safety valve that needs to be removed upon first use , remove that then open the gas and then iginite pilot flame.